Refer to the Part Printing Guidelines section of the official assembly manual for general print settings. For the latest parts files, visit the Voron Github repository. If you do not have the means to print your own parts in ABS, the Voron Print It Forward program is a great option to obtain the parts at a very reasonable cost. If you do plan on printing the parts, refer to the following directions for LDO kit specific options:
¶ Colour Coding
- Purple - These are not optional and must be printed for our kit to work.
- Blue - These are optional parts/changes that improve fit, appearance, or quality of life.
- Green- These are provided in the kits.
¶ Printed Parts
| Part | Image | Description |
| Stealthburner Toolhead | Our kit ships with parts to make the Stealthburner + Clockwork 2 toolhead, print the stealthburner and clockwork 2 parts here. | |
| Custom CW2 Cable Cover |
 |
While the standard clockwork 2 cable_door will fit with our kit, we also provide parts to use this custom cable door - which is designed to hold a captive screw and an external chamber thermistor. |
| CW2 PCB Spacer |
 |
This pcb_spacer is used to attach the Nitehawk PCB onto the Clockwork 2 extruder. Provided in the kit |
| XY Endstop |
 |
Our kit includes the XY microswitch PCB, print [a]_endstop_pod_D2F_switch instead of [a]_endstop_pod_hall_effect. |
| Nitehawk Adapter PCB Mount |
 |
This works with the Nitehawk adapter PCB. Put the PCB cover under the PCB and use 3 M3x10 SHCS screws to attach the PCB to the part. |
| Nitehawk Adapter PCB Cover |
 |
This part works with mount base to cover the USB adapter PCB. Use 3 M3x10 SHCS screws to attach the base, adapter PCB, and cover together. |
| Din Clip |
.jpg) |
Four pcb_din_clips are provided in the kits. One is used to work with Nitehawk adapter PCB mount. Two are used to install the Leviathan board. |
| Leviathan Bracket Left/Right |
 |
Our rev. D kits ship with the Leviathan mainboard. These brackets work with the DIN clips to mount the mainboard to the DIN rails. Use M2x10 self tapping screws to attach the DIN clips to the brackets and M3x8 SHCS to install the brackets to the PCB. |
| LDO Nozzle Probe |
 |
Our kit includes a custom Z endstop PCB for nozzle probing, the printed part is provided in the kit. |
| Cable Chain Parts |
 |
Our cable chain ends use the 2 hole configuration. |
| Plug Panel |
 |
Our kits ship with 1.0mm AC inlets with integrated switches. Use power_inlet_adamstech. |
| Bed Wago Mount |
 |
This is used to mount the WAGO terminals and a 2x2 XH splicer PCB, which are used to breakout the heatpad power and thermistor cables. 2xM3x8 SHCS and 2x Heatset Inserts. This part is provided as part of the kit. |
| Wago 221-415 Corner Mount |
 |
This is used to mount the 221-415 WAGO terminals, which are used to breakout the cables below the deck. |
| LED/Fan Splitter Spacer |
 |
Our kits ship with LED strips and an LED/Fan splitter PCB and two splitter spacer are provided to mount the PCBs to a 2020 extrusion. One is used for installing the LED strips and one is used to install the fan. |
| Stealthburner LED Diffuser |
 |
This is a standard part in Stealthburner toolhead used to diffuse the neopixel LED. This part is provided as part of the kit and is printed in clear PETG. |
| Z Cable Anchor |
 |
This slightly modified part is used to anchor the bed drag chain to the deck panel. The LDO trident deck panels have a slightly offset opening for bed cables. |
| Deck Wire Cover |
 |
This slightly modified cover is designed for LDO trident deck panels which have a slightly larger opening for cables |
| Touch Screen Mount |
 |
The BigTreeTech touchscreen, print the mount from here. Do not print the mini12864 parts under STLs/Skirt. |
| Deck Support Clips |
 |
Our kit ships with 4mm deck panels, using 4mm deck support clips will help prevent the deck from potential sagging. |
| LED Light Bar | The included COB LED light strips can be mounted using these light strip mounts. | |
| Handlebar Spacer |
 |
This optional part offsets the top panel thickness and helps mount the included aluminum handlebar. Mount with M5x14 screws and M5 T-Nut Hammer Heads. |
| Z stoppers |
 |
Totally optional stoppers that you can install at the top of the Z linear rails to prevent the carts from falling out. |
| LDO Insert |
 |
Show some LDO love and print this optional insert that can be installed into the skirts on your machine. |
| Exhaust Filter | The standard exhaust filter is optional since the kit includes only parts for the Nevermore filter. The kit does NOT include the necessary fan for this assembly. |
¶ Mods
- Klicky Probe - We include parts for the optional Klicky probe mod by jlas1, check out more info on the mod here.
- Nevermore Filter - Our Rev.A kits include parts to build a Nevermore Micro V5 by 0dsk4. print the version which uses 3x6 magnets. If you decide to build the Nevermore filter, print this exhaust cover with the stock exhaust grill to seal the back panel.
- Purge Bucket - Our kit includes a brass brush which you can convert into automated nozzle scrubber using this mod. Our build plate is slightly taller than standard so modified sheet stop files can be printed here.