|
Parts Box |
Items/Specs/Part NO |
Qty. |
| Build Plate & Parts | Drag Chain, 7x7mm | 1 |
| Aluminum Build Plate, 120x120x8mm Cast Aluminum | 1 | |
| Keenovo Silicone Heater, 100x100mm, 24VDC 60W, w/ Thermal Fuse | 1 | |
| Die Springs, Yellow, 8x4x20mm | 3 | |
| LDO Flex Plate, 120x120mm, Double Side PEI Coated | 1 | |
| LDO Flex Plate, 120x120mm, Single Side Smooth PEI | 1 | |
| Rubber Magnetic Pad, 120x120mm (130 DegC MAX) | 1 | |
| Thumb Nut, M3, SS304 | 3 | |
| Electronics & Wiring | DC/DC Buck Converter, 24V to 5V | 1 |
| Raspberry Pi Zero2W, (was 3B/4B, different reseller may give option ”without Pi") | 1 | |
| Raspberry Pi Power : an adxl board and a 2 pin cable | 1 | |
| MicroSD Card, 16G | 1 | |
| Blower Fan, 3010, 24V | 2 | |
| Axial Fan, 3006, 5V | 1 | |
| AC Inlet | 1 | |
| Fuse, Slow Blow, 250VAC 2A | 2 | |
| Heat Cartridge, 24V 50W | 1 | |
| Thermistor, NTC 100K B3950 | 1 | |
| LDO V0.1 Cable Kit (pre-cut&wired) | 1 | |
| Bowden Tubing, 4x3mm | 1 | |
| Zip Ties, 3x150mm | 100 | |
| Fasteners, Tools & Misc | Shim Washer, 6x3x0.5mm | 38 |
| Hex Nut, M2 | 60 | |
| Hex Nut, M3 | 130 | |
| Square Nut, M3 | 110 | |
| Lock Nut, M3 | 6 | |
| Machine Screw, BHCS, M2x6 | 75 | |
| Machine Screw, FHCS, M2x6 | 12 | |
| Machine Screw, SHCS, M2x8 | 12 | |
| Machine Screw, BHCS, M2.5x6 | 6 | |
| Machine Screw, BHCS, M3x6 | 63 | |
| Machine Screw, BHCS, M3x8 | 110 | |
| Machine Screw, BHCS, M3x10 | 28 | |
| Machine Screw, BHCS, M3x12 | 28 | |
| Machine Screw, BHCS, M3x16 | 6 | |
| Machine Screw, BHCS, M3x25 | 12 | |
| Machine Screw, BHCS, M3x30 | 12 | |
| Machine Screw, BHCS, M3x35 | 33 | |
| Machine Screw, BHCS, M3x40 | 12 | |
| Self-tapping Screw, M2x10 | 17 | |
| T Nut, 15x5.4x1.5 | 2 | |
| Brass Heatset Insert, M3x5x4 | 60 | |
| LDO customized Brass Heatset Insert Tool (Solder Tip) | 1 | |
| 3M VHB Tape | 1 | |
| Rubber Feet, 14x11x9mm | 4 | |
| Magnets, Neodymium, Round, 6x3mm | 10 | |
| Drill bit, 2mm | 1 | |
| Hex Wrench, 1.5mm | 3 | |
| Hex Wrench, 2mm | 1 | |
| Hex Wrench, 2.5mm | 1 | |
| Frame Kit | LDO V0 Frame kit (Color options: Black, Red, Blue, Purple, Green, Orange, Gold) | 1 |
| Linear Rail Kit | LDO customized Linear Rail Mounting Bar for V0.1 | 5 |
| LDO Stainless Steel Linear Rail Kit 5xLDO-SLR7H-150Z0 | 1 | |
|
Motor Kit
|
LDO Anti Backlash Nut, POM, Tr8X8 | 1 |
| LDO-36STH20-1004AHG(VRN) 36mm Pancake Stepper | 1 | |
| LDO-35STH52-1504AH(VRN) NEMA14 STEPPER HT | 2 | |
| LDO-42TSH25-1004CL200ET(VRN) with Teflon coated Z motor leadscrew shaft | 1 | |
| Panels | Side Panel 211mm x 229mm x 3mm Acrylic, Clear | 2 |
| Front Door 212mm x 239mm x 3mm Acrylic, Clear | 1 | |
|
Rear Panel Top 212mm x 63mm x 3mm Acrylic, Clear Black Rear Panel Bottom 212mm x 185mm x 3mm Acrylic, Clear Black |
1 | |
| Mid panel 170mm x 230mm x 3mm Acrylic, Matte Black | 1 | |
| Motor Panel 37mm x 122mm x 3mm Acrylic, Matte Black | 1 | |
| Deck Panel 172mm x 209mm x 3mm Acrylic, Matte Black | 1 | |
| TopHat Front/Rear Panel 2mm Acrylic, Clear | 2 | |
| TopHat Side Panel 2mm Acrylic, Clear | 2 | |
| TopHat Top Panel 2mm Acrylic, Clear | 1 | |
| Toolhead & Motion | Original Bondtech Drive Gear Kit | 1 |
| Teflon Tube, 4x2mm | 1 | |
| Captive Thumb Screw Assembly (LDO customized) | 1 | |
| Bearing, MR85 | 2 | |
| Bearing, F623-RS | 24 | |
| Pulley 2GT 20T (6mm wide) (5mm bore) | 2 | |
| Gates Belt, 2GT RF, 6mm | 4 meter | |
| Machine Screw, SHCS, M3x30, Partially Threaded | 2 | |
| Machine Screw, SHCS, M3x35, Partially Threaded | 3 | |
| PSU | Meanwell LRS-150-24 | 1 |
| Controller | Bigtreetech SKR mini E3 (v2) | 1 |
| Power Cord | C13 Power Cord, 1.5 meter | 1 |
| Hotend |
Phaetus DragonFly BMO Hotend (Please don't use the SCHC M2.5x6 in the hotend kit, and use the BHCS M2.5x6 from hardware kit for mounting) |
1 |
| N/A | PVC Wire Duct, 20Wx25H-mm | 330mm |
| Raspberry Pi Heatsink | 1 | |
| Print a Steppy hanging kit | 1 | |
|
RevA, 7/23/2021, by LDO Motors & LDO Systems RevB, 8/23/2021, by LDO Motors & LDO Systems, removed shipping sensive items, correct pannel thickness. RevC, 1/6/2022, by LDO Motors & LDO Systems, add (1) Raspberry Pi heatsink (2) Change rear panel to 2 pieces design for easy wiring maintain (3) Change SKR-PSU cable to a thicker size (4) add "print as steppy hanging kit. From DEC/2021 shipment. Serial NO start from V0-2112xxxx RevD, 5/19/2022, LDO Motors & LDO Systems, replaced extruder motor from LDO-36STH17-1004AH to LDO-36STH20-1004AHG (VRN); AB motor from LDO-35STH48-1684AH to LDO-35STH52-1504AH(VRN). Change Raspberry Pi to Zero2W, but some reseller may give option “without PI” cause serious shortage. – From Batch #6. |
||