Refer to the Part Printing Guidelines section of the official assembly manual for general print settings. For the latest parts files, visit the Voron Github repository. If you do not have the means to print your own parts in ABS, the Voron Print It Forward program is a great option to obtain the parts at a very reasonable cost. If you do plan on printing the parts, refer to the following directions for LDO kit specific options:
- Purple - These are not optional and must be printed for our kit to work.
- Blue - These are optional parts/changes that improve fit, appearance, or quality of life.
- Nozzle Probe - Our kit includes a Z endstop PCB for better modularity, use this part instead.
- Clockwork2 Parts- These parts from here is required so the toolhead PCB can mount the Clockwork2 extruder
- Cable Chain Parts - Our cable chain ends use the 2 hole configuration. When printing parts that interface with cable chains, always use the 2hole version instead of 3hole(e.g. xy_joint_cable_bridge_2hole instead of xy_joint_cable_bridge_3hole)
- Plug Panel - Our kits ship with 1.2mm AC inlets with integrated switches. Use power_inlet_IECGS_1.2mm instead of power_inlet_filtered or the power_inlet_IECGS_1mm.
- MGN12 rail for X axis - Our kits come with a single MGN12 linear rail that replaces the old double MGN9 rail X axis setup. Print the XY joints here, and X carriage from here.
- XY Endstop - Our kit includes the XY microswitch PCB, print [a]_endstop_pod_D2F_switch instead of [a]_endstop_pod_hall_effect.
- Breakout PCB Mount - This part works with the toolhead breakout PCB. Use 4 M2x10 self-tapping screws to attach the PCB to the part. Also print a DIN clip to mount onto the DIN rail.
- Controller Mount - Our rev. A kits ship with the BigTreeTech Octopus V1.1 controllers, the corresponding PCBmount can be found in the here, don't forget to also print two DIN clips.
- Heatbed Wiring Mount - Print this part to mount the WAGO terminals and PCB, which are used to breakout the heatpad power and thermistor cables.
- Beefy Raspberry Pi Mount - this optional Raspberry Pi mount uses two DIN clips instead of one for an extra secure grip on the DIN rails. Tip: if you find it difficult to insert the USB/Ethernet cables due to a lack of space, try rotating the RPi in relation to its mount.
- Deck Support Clips - Our kit ships with 4mm deck panels, using 4mm deck support clips will help prevent the deck from potential sagging.
- LED/Fan Splitter Spacer - Our kits ship with LED strips and an LED splitter PCB. Print this 2 x part to mount the splitter PCBs to a 2020 extrusion.
- LED Light Clip - The included LED light strips can be mounted using these bar clips by eddie. In total, you will need 36 or 42 clips for V2-300 and V2-350 respectively
- Handlebar Spacer - This optional part offsets the top panel thickness and helps mount the included aluminum handlebar. Mount with M5x14 screws and M5 T-Nut Hammer Heads.
- Z stoppers - Totally optional stoppers that you can install at the top of the Z linear rails to prevent the carts from falling out.
- LDO Insert - Show some LDO love and print this optional insert that can be installed into the skirts on your machine.
- Exhaust_Filter - The exhaust filter is optional since the kit includes only parts for the Nevermore filter. The kit does NOT include the necessary fan for this assembly.
- Z Belt Cover A - This modified z-belt cover A allows for the routing of the led strips through the Z-belt opening as an alternate path.
- LDO Door Handles/Hinges - The LDO alternative set of handles and hinges has a special spot to display your unique LDO Voron Kit #. You can use either M3x30, M3x35 or M3x40 SHCS screws for the hinges. You will also need the standard door latches.
- Klicky Probe - We include parts for the optional Klicky probe mod by jlas1, check out more info on the mod here.
- Nevermore Filter - Our Rev.A kits include parts to build a Nevermore Micro V5 Duo by 0dsk4. print the version which uses 3x6 magnets. If you decide to build the Nevermore filter, print this exhaust cover with the stock exhaust grill to seal the back panel.
- Steppy Keychain - Last but not least your kit comes with the steppy mascot keychain kit, you will need these printable parts.
- Purge Bucket - Starting from Rev. B, our kit includes a brass brush which you can convert into automated nozzle scrubber using this mod. Our build plate is slightly taller than standard so modified sheet stop files can be printed here.